Update download, install, introduction and Known issues sections of User Documentation.

Jürgen Knödlseder
1 parent d83471ca
Showing 4 changed files with 156 additions and 118 deletions
doc/source/download.rst
doc/source/issues.rst
doc/source/user_manual/getting.rst
doc/source/user_manual/introduction.rst
@@ -13,14 +13,7 @@ bugs.
 Releases
 --------
  
-The latest ctools release is ``ctools-0.9.0`` (22 May 2015).
-
-.. note::
-
-   The cscripts in the Mac OS X binary package ctools-0.9.0-macosx10.3.dmg 
-   were not working. If you encounter a problem please download the updated
-   binary package
-   `ctools-0.9.1-macosx10.3.dmg <http://cta.irap.omp.eu/ctools/releases/ctools/ctools-0.9.1-macosx10.3.dmg>`_.
+The latest ctools release is ``ctools-0.10.0`` (1 November 2015).
  
 Below a table of ctools releases. Please note that at this stage of the
 project there is a strict link between the ctools and gammalib versions.
@@ -35,6 +28,9 @@ gammalib.
    * - `ctools <http://cta.irap.omp.eu/ctools/releases/ctools/ChangeLog>`_
      - `gammalib <http://cta.irap.omp.eu/ctools/releases/gammalib/ChangeLog>`_
      - Mac OS X package
+   * - `0.10.0 <http://cta.irap.omp.eu/ctools/releases/ctools/ctools-0.10.0.tar.gz>`_
+     - `0.11.0 <http://cta.irap.omp.eu/ctools/releases/gammalib/gammalib-0.11.0.tar.gz>`_
+     - `ctools-0.10.0-macosx10.3.dmg <http://cta.irap.omp.eu/ctools/releases/ctools/ctools-0.10.0-macosx10.3.dmg>`_
    * - `0.9.0 <http://cta.irap.omp.eu/ctools/releases/ctools/ctools-0.9.0.tar.gz>`_
      - `0.10.0 <http://cta.irap.omp.eu/ctools/releases/gammalib/gammalib-0.10.0.tar.gz>`_
      - `ctools-0.9.1-macosx10.3.dmg <http://cta.irap.omp.eu/ctools/releases/ctools/ctools-0.9.1-macosx10.3.dmg>`_
@@ -132,6 +128,9 @@ the following command sequence (the code will be installed into the
    $ export CTOOLS=/usr/local/gamma
    $ source $CTOOLS/bin/ctools-init.sh
  
+Please read the :ref:`sec_getting` section if you need more information on
+how to install ctools.
+
 .. note::
  
   You need `swig <http://www.swig.org/>`_ on your system to build the
@@ -3,12 +3,17 @@
 Known issues
 ------------
  
-Below you will find a list of known issues.
+Below you will find a list of known ctools issues. You may also check the
+list of
+`known GammaLib issues <http://cta.irap.omp.eu/gammalib/doc/html/issues.html>`_.
  
 **Installation issues**
  
 - :ref:`Certificate problem when cloning from Git <issue_ssl>`
+- :ref:`Python module does not work <issue_python>`
 - :ref:`Python unit test fails on El Capitan <issue_elcapitan>`
+- :ref:`Installing on Solaris <issue_solaris>`
+- :ref:`Installing on OpenSolaris <issue_opensolaris>`
  
 **Analysis issues**
  
@@ -21,6 +26,7 @@ Below you will find a list of known issues.
 - :ref:`Shell model is biased when width is comparable to angular resolution <issue_shell>`
 - :ref:`Elliptical Gaussian model fit converges slowly <issue_egauss>`
  
+.. _installation_issues:
  
 Installation issues
 ^^^^^^^^^^^^^^^^^^^
@@ -38,6 +44,30 @@ Installation issues
  
        export GIT_SSL_NO_VERIFY=true
  
+.. _issue_python:
+
+.. topic:: Python module does not work
+
+   ctools include a Python module that is built from so called wrapper 
+   files that are autogenerated using the `swig <http://www.swig.org/>`_
+   tool. These wrapper files are shipped with a ctools release, but if
+   you use the code from git you need `swig <http://www.swig.org/>`_
+   to generate the wrapper files during the build step. In any case,
+   to compile the Python module ctools need the ``Python.h`` header file
+   which may not necessarily be installed on your system. Check the output
+   of ``./configure`` to examine the configuration that ctools has
+   detected. You may see the following::
+
+   * Python                       (yes)
+   * Python.h                     (yes)
+   * swig                         (yes)
+   * Python wrappers              (yes)
+
+   Recall, if the wrappers exist you do not need `swig <http://www.swig.org/>`_,
+   but if the wrappers don't exist you need `swig <http://www.swig.org/>`_.
+   If the ``Python.h`` header file does not exist then install the Python
+   development package.
+
 .. _issue_elcapitan:
  
 .. topic:: Python unit test fails on El Capitan
@@ -48,6 +78,38 @@ Installation issues
     workaround is to install the ctools before running the unit test using 
     ``make check``.
  
+.. _issue_solaris:
+
+.. topic:: Installing on Solaris
+
+    Although ctools build on Solaris using the Sun compiler, there are
+    problems with global symbols in shared libraries and exception catching,
+    which prevents the FITS interface to work correctly. ctools have however
+    been built and tested successfully using the GNU compiler, and this is
+    the only build method that is currently supported. Problems have also
+    been encountered when compiling cfitsio versions more recent than 3.250.
+    The problems have been reported to the cfitsio developer team, and are
+    likely to be solved in the future. For the time being, it is recommended
+    to use cfitsio version 3.250 on Solaris.
+
+.. _issue_opensolaris:
+
+.. topic:: Installing on OpenSolaris
+
+   On OpenSolaris, the same problems concerning the SunStudio compiler
+   occur as for Solaris, and also here, the GNU compiler is the recommended
+   tool to build ctools. Also here, cfitsio version 3.250 is the recommended
+   library as more recent version feature relocation problems. ctools have
+   been tested using gcc 4.3.2 on OpenSolaris 2009.06. Make sure to create
+   the symbolic links
+
+   .. code-block:: csh
+
+      $ ln -s /usr/bin/gcc4.3.2 /usr/bin/gcc
+      $ ln -s /usr/bin/g++4.3.2 /usr/bin/g++
+
+   which are not there by default. This avoids warnings during compilation.
+
  
 Analysis issues
 ^^^^^^^^^^^^^^^
+.. _sec_getting:
+
 Getting the ctools
 ==================
  
@@ -25,6 +27,8 @@ software:
 No system administrator privileges are needed to install ctools.
  
  
+.. _sec_installing_gammalib:
+
 Installing gammalib
 -------------------
  
@@ -59,7 +63,7 @@ in an appropriate location (for example ``$HOME/builds``), and type
  
 .. code-block:: bash
  
-  $ tar xvfz gammalib-0.10.0.tar.gz
+  $ tar xvfz gammalib-0.11.0.tar.gz
  
 (the ``$`` symbol indicates the console prompt and is not part of the
 command that you should type in).
@@ -69,7 +73,7 @@ typing
  
 .. code-block:: bash
  
-  $ cd gammalib-0.10.0
+  $ cd gammalib-0.11.0
   $ ./configure
   $ make
   $ make check
@@ -91,6 +95,8 @@ which then installs GammaLib in the ``gamma`` folder of your home
 directory.
  
  
+.. _sec_setup_gammalib:
+
 Setting up the GammaLib environment
 -----------------------------------
  
@@ -127,7 +133,7 @@ an appropriate location (for example ``$HOME/builds``), and type
  
 .. code-block:: bash
  
-  $ tar xvfz ctools-0.9.0.tar.gz
+  $ tar xvfz ctools-0.10.0.tar.gz
  
 (the ``$`` symbol indicates the console prompt and is not part of the
 command that you should type in).
@@ -136,7 +142,7 @@ Step in the directory and build the ctools by typing
  
 .. code-block:: bash
  
-  $ cd ctools-0.9.0
+  $ cd ctools-0.10.0
   $ ./configure
   $ make
  
@@ -153,6 +159,8 @@ You can get the full list of configuration options by typing
   $ ./configure --help
  
  
+.. _sec_testing_ctools:
+
 Testing ctools
 --------------
  
@@ -173,7 +181,7 @@ following output at the end of the unit testing:
   PASS: test_python.py
   make[4]: Nothing to be done for `all'.
   ============================================================================
-  Testsuite summary for ctools 0.9.0
+  Testsuite summary for ctools 0.10.0
   ============================================================================
   # TOTAL: 3
   # PASS:  3
@@ -204,6 +212,7 @@ For older automake version, you should see
   Test ctcubemask: .. ok
   Test ctbutterfly: .. ok
   Test ctulimit: .. ok
+  Test cterror: .. ok
   PASS: test_ctools.sh
  
   *****************
@@ -237,6 +246,7 @@ For older automake version, you should see
   Test ctcubemask functionality: ... ok
   Test ctbutterfly functionality: ... ok
   Test ctulimit functionality: ... ok
+  Test cterror functionality: ... ok
   Test unbinned pipeline with FITS file saving: .... ok
   Test unbinned in-memory pipeline: .... ok
   PASS: test_python.py
@@ -254,14 +264,17 @@ versions, but there it is written in log files that you can find in the
   test_cscripts.sh.log
   test_python.py.log
  
-If you do not see the same output, but a failure message, please report 
-this to the ctools developer team.
+If you do not see the same output, but a failure message, please check
+first the :ref:`issues` section. If you cannot fix the problem, please
+create an issue on the ctools tracker
+`here <https://cta-redmine.irap.omp.eu/projects/ctools>`_.
  
+.. _sec_installing_ctools:
  
 Installing ctools
 -----------------
  
-The ctools are installed by typing
+Now you are ready to install the ctools by typing
  
 .. code-block:: bash
  
@@ -284,13 +297,14 @@ can be given, for example:
  
   $ ./configure --prefix=$HOME/gamma
  
+.. _sec_setup_ctools:
  
 Setting up the ctools environment
 ---------------------------------
  
 You have to configure ctools by setting up some environment variables. This
 will be done automatically by an initialisation script that is found in the
-``bin`` directory of the directory into which ctools has been installed. 
+``bin`` directory of the ctools installation. 
 Assuming that you have installed ctools into ``/usr/local/gamma`` you need
 to add the following to your ``$HOME/.bashrc`` or ``$HOME/.profile`` script
 on a Linux machine:
@@ -308,13 +322,14 @@ If you use C shell or a variant then add the following to your
   setenv CTOOLS /usr/local/gamma
   source $CTOOLS/bin/ctools-init.csh
  
+.. _sec_check_ctools_setup:
  
 Checking your setup
 -------------------
  
 Now you should be ready to get started using Gammalib and ctools.
  
-As a quick check that your setup is OK, you can run ``csinfo check``:
+As a quick check that your setup is okay you can run ``csinfo check``:
  
 .. code-block:: bash
  
@@ -329,7 +344,7 @@ As a quick check that your setup is OK, you can run ``csinfo check``:
  
      ===> Your Gammalib / ctools setup is OK.
  
-If the setup is not OK, run the ``csinfo info`` command to print
+If the setup is not okay, run the ``csinfo info`` command to print
 detailed information about your setup.
 There's also a ``csinfo list`` command to quickly list the available tools:
  
@@ -345,89 +360,16 @@ There&#39;s also a ``csinfo list`` command to quickly list the available tools:
      csinfo info    Print Gammalib / ctools setup info
  
  
+.. _sec_known_problems:
+
 Known problems
 --------------
  
-GammaLib unit tests fail
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Some users have reported failure of a large fraction of the GammaLib unit
-tests after after typing ``make check``. In all cases, this was related to
-not finding the ``libcfitsio`` library. To solve the issue, locate the 
-directory where the shared ``libcfitsio`` library resides and then type
-
-.. code-block:: bash
-
-  export LD_LIBRARY_PATH=/directory/to/lib:$LD_LIBRARY_PATH
-
-on Unix based systems or
-
-.. code-block:: bash
-
-  export DYLD_LIBRARY_PATH=/directory/to/lib:$DYLD_LIBRARY_PATH
-
-on Mac OS X (``/directory/to/lib`` should be replaced by the correct
-library path on your system).
-
-
-Python support
-~~~~~~~~~~~~~~
-
-ctools comes with Python wrappers so that all classes can be directly 
-used from Python. To compile-in Python support, ctools needs the 
-``Python.h`` header file, which on many distributions is not installed
-by default. To make ``Python.h`` available, install the Python developer
-package in your distribution. Otherwise you will not be able to use ctools
-from Python.
-
-GammaLib and ctools release bundles come with Python wrapper files, but 
-these wrapper files will be deleted once you type ``make clean``. Wrapper
-files will be built automatically when needed, but this required
-`swig <http://www.swig.org/>`_ installed on your system. In that case,
-please make sure that you swig version 2.0.4 or newer.
-
-
-Mac OS X
-~~~~~~~~
-
-The Python development package is not installed by default on Mac OS X,
-and consequently, the ``Python.h`` header file is missing that is needed
-to compile in the Python bindings. The configure script recognises this
-fact and adjust the build procedure accordingly, but you will not be able
-to use ctools as a Python module. So better install the Python development
-package before installing ctools.
-
-It was also reported that adding of 
-``export MACOSX_DEPLOYMENT_TARGET=10.6`` to the ``.bashrc`` file was
-necessary one some Mac OS X 10.6 installations to make ctools compile.
-
-
-Solaris
-~~~~~~~
-
-Although ctools builds on Solaris using the Sun compiler, there are problems
-with global symbols in shared libraries and exception catching, which prevents
-the FITS interface to work correctly. ctools has however been built and tested
-successfully using the GNU compiler, and this is the only build method that
-is currently supported. Problems have also been encountered when compiling
-cfitsio versions more recent than 3.250. The problems have been reported to
-the cfitsio developer team, and are likely to be solved in the future. For 
-the time being, it is recommended to use cfitsio version 3.250 on Solaris.
-
-
-OpenSolaris
-~~~~~~~~~~~
-
-On OpenSolaris, the same problems concerning the SunStudio compiler occur
-as for Solaris, and also here, the GNU compiler is the recommended tool to
-build ctools. Also here, cfitsio version 3.250 is the recommended library as
-more recent version feature relocation problems. ctools has been tested 
-using gcc 4.3.2 on OpenSolaris 2009.06. Make sure to create the symbolic 
-links
-
-.. code-block:: csh
-
-  $ ln -s /usr/bin/gcc4.3.2 /usr/bin/gcc
-  $ ln -s /usr/bin/g++4.3.2 /usr/bin/g++
-
-which are not there by default to avoid excess warnings during compilation.
 \ No newline at end of file
+In case you encounter problem, please check the list of known
+:ref:`installation_issues`.
+If you encounter problems during the GammaLib installation, please
+check the list of
+`known GammaLib issues <http://cta.irap.omp.eu/gammalib/doc/html/issues.html>`_.
+If you cannot solve your problems, please create an issue on the
+ctools tracker
+`here <https://cta-redmine.irap.omp.eu/projects/ctools>`_.
+.. _sec_introduction:
+
 Introduction
 ============
  
-ctools is a highly modular collection of utilities for processing
-and analysing CTA reconstructed event data in the FITS (Flexible
-Image Transport System) data format. Each utility presents itself
-as a FTOOL (see http://heasarc.gsfc.nasa.gov/ftools/) and performs
-a single simple task such as event binning, event selection or model
-fitting. Individual utilities can easily be chained together in
-scripts to achieve more complex operations, either by using the command
-line interface, or by using the Python scripting language. The ctools
-user interface is controlled by standard IRAF-style parameter files.
-Software is written in C++ to provide portability across most computer
-systems. The data format dependencies between hardware platforms are
-isolated through the cfitsio library package from HEASARC 
-(http://heasarc.gsfc.nasa.gov/fitsio/).
-
-This User Manual describes the use of the ctools software.
 \ No newline at end of file
+ctools is a software package developed for the scientific analysis of 
+Cherenkov Telescope Array (CTA) data or any other Imaging Air Cherenkov 
+Telescope. ctools comprises a set of ftools-like binary executables, 
+written in C++, with a command-line interface allowing for interactive
+step-wise data analysis. To start a ctool from the command line, simply 
+type the name of the ctool:
+
+.. code-block:: bash
+
+  $ ctobssim
+  RA of pointing (degrees) (0-360) [83.63] 
+
+The ctool will query all user parameters and execute. User parameters can
+also be specified as arguments separated by a whitespace to the ctool:
+
+.. code-block:: bash
+
+  $ ctobssim ra=83.63 dec=22.01 rad=5.0 tmin=0 tmax=1800 emin=0.1 emax=100.0 caldb=prod2 irf=South_50h inmodel=$CTOOLS/share/models/crab.xml outevents=events.fits
+
+ctools includes also a Python module that declares every ctool as a
+Python class. The following example illustrates the usage:
+
+.. code-block:: bash
+
+  $ python
+  >>> import ctools
+  >>> sim = ctools.ctobssim()
+  >>> sim["ra"]  = 83.63
+  >>> sim["dec"] = 22.01
+  >>> sim.execute()
+  Radius of FOV (degrees) (0-180) [5.0]
+
+ctools comprise also cscripts, which are Python scripts that have the same 
+user interface as the ctools binaries. cscripts can be started from the 
+command line or used as Python classes, as illustrated below:
+
+.. code-block:: bash
+
+  $ python
+  >>> import cscripts
+  >>> pull = cscripts.cspull()
+
+In this User Manual you will now learn how to install and use the ctools
+package.
+If you encounter any problems, please read the :ref:`issues` section.
+If you're desperate, you may need :ref:`help`.
+And you should read the :ref:`develop` section if you would like to 
+contribute to the ctools developments.